Symbol SPT 1700 Series Product Reference Manual page 255

Setup
This menu option allows you to customize the Hardware and Code Format setup.
Hardware Setup:
Beep on Good Decode: determines whether or not the terminal beeps to indicate a
!
successful decode.
Redundancy: determines whether or not the scanner uses redundancy.
!
Linear Security: defines the linear security level to be used by the scanner; level 1, 2,
!
3, or 4.
Scan Angle: defines the scan angle to be used by the scanner; wide angle or narrow
!
angle.
Decode LED On Time: defines the length of time the decode LED remains on when
!
a symbol is decoded.
Laser On Time: defines the length of time the laser beam remains on when the trigger
!
is pressed.
Aim Duration: defines the length of time the laser pointer beam remains on when the
!
trigger is pressed or the scan button is tapped.
Code Format Setup:
Code ID Char: defines the CodeID Character. The options are None, AIM and
!
Symbol.
Tx Format: defines the data transmission format.
!
Prefix/Suffix: defines the Prefix and Suffix values.
!
Beep
This menu option allows you to customize the Frequency, Duration and Pattern of the
scanner's beep.
Options
This menu option allows you to reset Defaults, change the data display preferences, and view
the About Scan Demo screen.
Scanning 1-D Bar Codes using Demo Scan
To scan 1-D bar codes:
1. Select the Demo Scan application icon from your main application screen.
2. If desired, customize your scanner's features by selecting from the various options as
described in the previous section.
Applications: Laser Scanner
15-5