Creating A Login Script - Symbol SPT 1700 Series Product Reference Manual

SPT 1700 Series Product Reference Guide
To enter a permanent IP address:
1. Clear the IP Address check box to disable this option and display a permanent IP
address field below the check box.
2. Tap the space to the left of the first period then enter the first section of the IP
address.
Note: Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap the OK button to confirm your selection and return to the Network Preferences
screen.

Creating a Login Script

A login script is a series of commands, similar to an autoexec.bat file, that automates logging
into your ISP. You can create login script files by selecting commands from the Command
pick list in the Login Script dialog. Some of these commands, such as Send, require you to
supply additional information and have a parameter field for the necessary data.
Note: You can also use non-ASCII and literal characters in your login script.
See Appendix C, Non-ASCII Characters for Login Scripts for
additional information.
To create a login script:
1. Tap the Script button in the Details dialog to open the Login Script dialog.
2. Tap the End pick list to open the Command list.
12-22
Tap to select automatic IP
address