Trigger Mode - Symbol SPT 1700 Series Product Reference Manual

SPT 1700 Series Product Reference Guide
The List of Available Symbologies
Allows you to select the symbologies to be recognized by the scanner by tapping on the box
next to the name of the desired symbology. When selected, the box has a check mark.
Scan Enable
When this option is clicked, and the trigger is pressed, the laser scanner beam activates. The
beam remains on for approximately 3 seconds. Alternatively, tap on the Scan button on the
bottom of the screen. This also activates the laser scanner for approximately 3 seconds.
LED
When this box is checked, the green LED lights. This serves as a test of the LED. To stop the
LED test, tap the LED box again.

Trigger Mode

This is a pull-down menu. The options are as follows:
Level: only the SPT 1700 scan trigger initiates the scan; the laser is turned off when
!
the trigger is released or the decode was successful.
Pulse: only the SPT 1700 scan trigger initiates the scan; the laser is turned off when
!
laser_on_time is reached or when the decode was successful.
Host (default): The SPT 1700 scan trigger or the application's ScanCmdStartDecode
!
command initiates the scan; the laser is turned off when the trigger is released, or
when laser_on_time is reached, the ScanCmdStopDecode command is called, or the
decode was successful.
Bar Type
Once a bar code is decoded, displays the type of the decoded bar codes (i.e., Code 39, Code
128, Code 93, etc.)
Bar Data
Once a bar code is decoded, displays the decoded data.
Demo Scan Menu Options
To customize some of these features, select your Menu icon to display the menu bar available
for this application. The following are the menu options:
15-4