Introduction; Unpacking The Terminal - Symbol PDT 8100 Series Product Reference Manual

Introduction

This chapter explains the physical buttons and controls on the terminal, how to install and
charge the batteries, attach the handstrap, and start the terminal for the first time.

Unpacking the Terminal

Carefully remove all protective material from around the terminal and save the shipping
container for later storage and shipping.
Verify that all of the equipment listed below was included:
• a terminal
• a lithium-ion battery
• a handstrap, attached to the terminal
• a stylus
• a Quick Reference Guide for the terminal.
Inspect the equipment for damage. If any equipment is missing or damaged, contact the
Symbol Technologies Support Center immediately. See
Getting Started
page xvi for contact information.
1-3