Introduction; Unpacking The Terminal - Symbol PDT 8100 Series Product Reference Manual

Getting Started

Introduction

This chapter explains the physical buttons and controls on your PDT 8100 terminal, how to
install and charge the batteries, attach the handstrap, and start your PDT 8100 terminal for
the first time.

Unpacking the Terminal

Carefully remove all protective material from around the terminal and save the shipping
container for later storage and shipping.
Verify that you received all equipment listed on the packing slip and inspect the equipment
for damage. If you are missing any equipment or if you find any damaged equipment,
contact the Symbol Technologies Support Center immediately. See page xiv for contact
information.
1-3