Table of Contents
Advertisement
PDT 3400 Product Reference Guide
Creating the Script for the Hex Image
On start-up, TCM displays the screen shown in Figure 6-1, with the Script Browser window
and File Browser window pointing to the SDK3400\SCRIPTS directory and the SDK3400
directory. The Script Window directory pane displays two volumes: VOLUMELABEL, the
uncompressed volume, and <CMP:>, the compressed volume.
To set up a new script:
t
Create a new script file or open an existing script
t
Drag and drop existing scripts to that "master" script
t
Drag and drop existing files and/or directories to the master script
t
Edit the system files for the script
t
Set the script parameters
t
Set the system boot file path (for a bootable image) if necessary
t
Save the script
t
Review and modify the script.
Each process is described in the sections that follow.
Open a New or Existing Script
Scripts are created in the Script Window.
To open a new script:
t
Choose File | New from the menu bar.
t
OR select the New button from the tool bar.
To open an existing script (e.g., a standard script provided in the SDK):
t
Choose File | Open from the menu bar and select the script file name.
t
OR select the Open button from the toolbar and select the script file name.
t
OR double click on an existing script in the Script Browser window.
Note: If you open and make changes to an existing script, saving the changes
writes over the existing script. If you wish to use an original or
Symbol-supplied standard script as a base and save the changes in a
new script, use Save As instead of Save after making the changes.
6-6
Advertisement
Table of Contents
