Malicious Call Trace - Tadiran Telecom T328 User Manual

Malicious Call Trace

Details of incoming calls can be collected using Malicious Call Trace. Call details are collected when your station rings
even if you do not answer. The number of calls stored for your station is defined by your system administrator. When the
list is full, the oldest record is removed and the new one is added. Details of calls are recorded until you cancel the feature.
The details recorded are: Originating number (for external calls: ANI if available, else trunk number), your station number
and the time of calls.
To activate malicious call trace:
Dial the entire procedure in a single block sequence.
1. Dial feature code #1740.
2. Dial the activation code .
[Send]
3. Press OK or .
4. Listen for the confirmation tone.
5. Press SPKR to hang up.

Note: If you hear a reorder tone, Malicious Call Trace is denied at your station (as defined by the Class of Service). To
use the feature, ask your Attendant to activate Malicious Call Trace at your station.
Malicious Call Trace 176 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
#1740