Tadiran Telecom T328 User Manual page 226

Tadiran telecom ip telephone user guide
Table of Contents

Advertisement

Reminder
To cancel a Reminder time:
Dial the entire procedure in a single block sequence.
1. Dial Reminder feature code #172.
2. Dial cancellation code .
[Send]
3. Press OK or
.
4. Listen for the confirmation tone.
5. Press SPKR to hang up.
Note: Reminder times must be cancelled one at a time. If you have more than one reminder time programmed, then
the closest reminder time to the present hour is cancelled. You must repeat this procedure to cancel each
subsequent reminder time.
Reminder
212 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T328 and is the answer not in the manual?

Questions and answers

Charlene
April 21, 2025

change date/ time on Tadiran Telecom desk phone

1 comments:
Mr. Anderson
May 11, 2025

To change the date and time on a Tadiran Telecom T328 desk phone:

1. Press [Menu].
2. Navigate to: Settings → Basic Settings → Time & Date → SNTP Setting.
3. To change the primary NTP server:
- Select "NTP Server1".
- Edit the server address to match the time source for your phone.
- Use [Del] to delete the old entry.
- Press OK or [Save] to apply changes.
4. To change the secondary NTP server:
- Select "NTP Server2".
- Edit the server similarly.
- Press OK or [Save].

To enable or disable Daylight Saving Time:
1. Navigate to: SNTP Setting → Daylight Saving.
2. Use [Switch] or left/right keys to change the setting.

Note: The phone gets time automatically from the NTP server. For manual time setting, other steps are required (not provided in the context).

This answer is automatically generated

Table of Contents

Save PDF