Tadiran Telecom T328 User Manual page 222

Programmable Buttons (Line and Memory Keys)
To program a programmable button as a BLF key (Memory Key only):
[Menu]
1. Press or, if this is an expansion key, press the relevant button for about five seconds and skip to Step 4.
2. Use the navigator keys to scroll to Memory Keys as DSS Keys Type (2. Features -> 3. DSS Keys-> 2. Memory Keys
as DSS Keys) and press OK or
3. Use the up/down navigator keys to select the button to be programmed and press OK or
for button numbers):
page 200
- Memory Key 1 corresponds to programmable memory key labeled 1.
- Memory Key 2 corresponds to programmable memory key labeled 2.
- Memory Key 3 corresponds to programmable memory key labeled 3.
- Memory Key 4 corresponds to programmable memory key labeled 4.
- Memory Key 5 corresponds to programmable memory key labeled 5.
- Memory Key 6 corresponds to programmable memory key labeled 6.
- Memory Key 7 corresponds to programmable memory key labeled 7.
- Memory Key 8 corresponds to programmable memory key labeled 8.
- Memory Key 9 corresponds to programmable memory key labeled 9.
- Memory Key 10 corresponds to programmable memory key labeled 10.
[Switch]
or the right/left navigator keys to select BLF.
4. Use
5. Use the down navigator key to select Line ID:.
[Switch]
6. Use or the right/left navigator keys to select the account number you want to associate with this button.
7. Enter the pickup number from the dial pad. Use
[Save]
8. Press OK or
to save your changes.
Programmable Buttons (Line and Memory Keys)
[Enter]
.
[Del]
to delete.
208 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
[Enter]
to select (see figure on