Follow Me - Tadiran Telecom T328 User Manual

Follow Me

This feature allows you to collect your calls from another station. The source station is then put into a Call Forward All
state. Follow Me can be activated only from the new location. You can choose between two Follow Me options:
• Forwarding all, your internal and external calls to your new location, provided that Call Forward All External is not
defined at your station
• Forwarding only your external calls to your new location, while internal calls continue ringing at your phone
To activate Follow Me:
Dial the entire procedure in a single block sequence.
1. Dial the appropriate Follow Me feature code (see Table 6) from the remote location where you wish the calls to be
forwarded.
2. Dial your own station number.
3. Dial activation code .
[Send]
4. Press OK or
.
5. Listen for the confirmation tone.
6. Press SPKR to hang up.
Follow Me
Table 6: Follow Me Codes
Follow Me Type Feature Codes
All
External #17713
145 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
#189
#189 / #17713