Log-In/Out - For A Single Acd Group; Log-In/Out - For A Single Acd Group - Tadiran Telecom T328 User Manual

ACD & UCD Groups: Log-In/Out - for a Single ACD Group
This feature is used when an ACD group member joins or leaves an ACD group. A user can simultaneously be a member of
numerous ACD groups.
To Log-In to a single group:
Dial the entire procedure in a single block sequence.
1. Dial Log-In/Out feature code #1974.
2. Dial your ACD group number.
3. Dial activation code .
[Send]
4. Press OK or .
5. Listen for the confirmation tone.
6. Press SPKR to hang up.
To Log-Out from a single group:
1. Dial Log-In/Out feature code #1974.
2. Dial your ACD group number.
3. Dial cancellation code .
[Send]
4. Press OK or .
5. Listen for the confirmation tone.
6. Press SPKR to hang up.

Notes: 1) When logging in or out from additional groups, the above procedures are repeated as many times as needed.
2) In some groups, in order to log in, you must first have defined an ID number (see
3) If you log-out from your primary group using this feature code, you must also log-out as primary, so the group
is no longer marked as your primary (see
ACD & UCD Groups

Log-In/Out - for a Single ACD Group

page 97).
96 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
#1974
page 95).