Class Of Service (Cos) Switchover - Tadiran Telecom T328 User Manual

Class of Service (COS) Switchover

Each station has a Primary and Secondary Class of Service (COS), which provides the basis for dialing and feature
capabilities for a particular station. You can change from one COS to another. See
for further details.
To select your station's Secondary COS:
Dial the entire procedure in a single block sequence.
1. Dial COS Switchover feature code #149.
2. Dial your passcode (four digits).
3. Dial activation code .
[Send]
4. Press OK or .
5. Listen for the confirmation tone.
6. Press SPKR to hang up.
To return to your station's Primary COS:
Dial the entire procedure in a single block sequence.
1. Dial COS Switchover feature code #149.
2. Dial your passcode (four digits).
3. Dial cancellation code .
[Send]
4. Press OK or
.
5. Listen for the confirmation tone.
6. Press SPKR to hang up.

Notes: 1) To perform COS Switchover at your phone, you must first have a defined passcode (see
2) The selection of secondary COS is denied when your phone is in Check Out mode.
Class of Service (COS) Switchover
"Class of Service (COS)" on page A-1
127 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
#149
page 193).