Group Listening - Tadiran Telecom T328 User Manual

Group Listening

Group Listening can be used during a call to allow additional people to converse from your station. Using this mode you
are able to speak and listen using the handset or headset while others around you can speak and listen via your
speakerphone. To activate Group Listening, press the preprogrammed button during a call.

Note: This is a toggle feature. Press the pre-progammed button again to deactivate Group Listening at your station.
To program a programmable button with Group Listening:
[Menu]
1. Press .
2. Use the navigator keys to scroll to DSS Keys Type (2. Features -> 3. DSS Keys) and press OK or
3. Press one of the following:
1. Line Keys as DSS Keys - to program one of the Line Keys.
2. Memory Keys as DSS Keys - to program one of the Memory Keys.
4. Use the up/down navigator keys to select the button to be programmed and press OK or
for button numbers):
page 200
• DSS Key 1 corresponds to programmable key labeled 1.
• DSS Key 2 corresponds to programmable key labeled 2.
• DSS Key 3 corresponds to programmable key labeled 3.
• DSS Key 4 corresponds to programmable key labeled 4.
• DSS Key 5 corresponds to programmable key labeled 5.
• DSS Key 6 corresponds to programmable key labeled 6.
- Memory Key 1 corresponds to programmable memory key labeled 1.
- Memory Key 2 corresponds to programmable memory key labeled 2.
- Memory Key 3 corresponds to programmable memory key labeled 3.
- Memory Key 4 corresponds to programmable memory key labeled 4.
Group Listening 163 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
[Menu] >...Group Listening
[Enter]
.
[Enter]
to select (see figure on