Network Settings - Tadiran Telecom T328 User Manual

Network Settings

The T300 Series requires IP network settings in order to operate the phone. These settings may be defined in the options
provided by this [Menu] item.

Note: These options are usually configured by the System Administrator and should not be changed by the user
unless instructed to by qualified technicians.
To change any of your Network Settings (administrators only):
[Menu]
1. Press .
2. Use the up/down navigator keys to select 3.Settings and press OK.
3. Use the up/down navigator keys to select 2.Advanced Setting and press OK.
4. Enter the Admin password and press Confirm.
5. Use the up/down navigator keys to select 2.Network and press OK.
6. The Network: page displays the following options, (use the navigator keys to scroll and OK to select):
• WAN Port Option:
address from the DHCP server:
- DHCP: Choose DHCP to receive your IP address from the DHCP server.
- Static IP:
Choose Static IP to enter a Static IP address.
- PPPoE: Choose PPPoE to enter username and password as required by your Internet service provider.
• LAN Port Option:
• VLAN Option:
• Webserver Type:
Save your changes:
[Save]
7. Press . The Saving files! Please wait... message is displayed.
Operating the Phone
Network Settings
Allows you to choose between defining a static IP address for your phone or receiving an IP
Define the LAN type for your phone (bridge or router).
Define VLAN parameters for your phone.
Define IP protocols for your phone (HTTP or HTTPS).
39 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)