Freedom (Irss) - Tadiran Telecom T328 User Manual

Tadiran telecom ip telephone user guide

page of 253

/ 253
Contents
Table of Contents
Bookmarks

Table of Contents

Freedom (IRSS)

The Freedom feature, also known as Individual Remote System Services (IRSS), enables you to connect an off-site non-

Coral phone (such as your home phone or mobile) to the Coral and make calls from within the system. Many of Coral's

extensive features (e.g. transfer, conference call, voice mail, access to public and private libraries) are available from this

off-site phone. The off-site phone operates as a virtual station in the Coral network, retaining the original features of the

external phone in addition to the Coral features.

To enable the Freedom feature (for remote phones providing Caller ID):



Note: Before enabling the Freedom feature at your Coral station, you must program a Private/Public Library number

with your off-site phone number (see

contain your Freedom destinations.

Dial the entire procedure in a single block sequence.

1. Dial Freedom feature code #17714.

2. Dial the number of a Private/Public Library defined with your off-

site phone number.

[Send]

3. Press OK or

4. Listen for the confirmation tone.

5. Press SPKR to hang up.

Freedom (IRSS)

218-221). Use the table below to record library numbers that

pages

147 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)

Private/Public

Freedom Phone Number

Library Number

#17714

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Need help?

Do you have a question about the T328 and is the answer not in the manual?

Questions and answers

Charlene

April 21, 2025

change date/ time on Tadiran Telecom desk phone

1 comments:

Mr. Anderson

May 11, 2025

To change the date and time on a Tadiran Telecom T328 desk phone:

1. Press [Menu].
2. Navigate to: Settings → Basic Settings → Time & Date → SNTP Setting.
3. To change the primary NTP server:
- Select "NTP Server1".
- Edit the server address to match the time source for your phone.
- Use [Del] to delete the old entry.
- Press OK or [Save] to apply changes.
4. To change the secondary NTP server:
- Select "NTP Server2".
- Edit the server similarly.
- Press OK or [Save].

To enable or disable Daylight Saving Time:
1. Navigate to: SNTP Setting → Daylight Saving.
2. Use [Switch] or left/right keys to change the setting.

Note: The phone gets time automatically from the NTP server. For manual time setting, other steps are required (not provided in the context).