Tadiran Telecom T328 User Manual page 164

Freedom (IRSS)
To place a call from a Freedom phone that does not provide Caller ID:
This applies for Freedom calls from off-site phones that do not possess a Caller ID number and, therefore, cannot be
identified by the Coral.

Notes: 1) Some phones may be denied the Executive Privilege feature (defined by Class of Service).
2) In order to use Executive Privilege your station must be defined with a passcode (see
1. Place a call to the Executive Privilege number (contact your system administrator for that number).
2. Listen for dial tone.
3. Dial your own Coral station number.
4. Dial your four-digit passcode.
5. Listen for distinctive dial tone.
6. Dial the required destination number.
Possible destinations can be: external number (stationary or cellular), network number, or a Coral destination,
including station, trunk/trunk group, dial service, routing access, public/private library, voice mail.

Note:
• If your destination is an external number, it should be preceded by an external line access code.
• If your destination is voice mail (IVR access code), skip to
• If your destination is a FlexiCall All feature, skip to
• To enable another Freedom phone, skip to
7. Listen for the ringback tone.
8. Wait for an answer.
9. You can activate any of the options described in the table on
Freedom (IRSS)
page 153.
page 154.
page 155.
page 151.
150 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
page 193).