Tadiran Telecom T328 User Manual page 239

Transfer
To perform unscreened transfer of an established call:
1. During the call, press one of the following:
[Transfer]
• the soft key
• a pre-programmed Transfer button (see
2. This places the first party on hold and gives you a second dial tone.
3. Dial the Transfer destination number.
[Send]
4. Press OK or .
[Transfer]
5. Press the soft key or the pre-programmed Transfer button again.When you hang up, you are disconnected
from the call.
Transfer
page 226)
225 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)