Passcode
You can define a private unique Coral passcode for your station set. The passcode will allow you (if defined in your COS)
to use the following Coral features:
• COS Switchover (see
page
• Executive Privilege (see
page
• Freedom (IRSS) (see
page
• Phone Lock (see
page
195)
The passcode can easily be changed. Defining a passcode for the first time or changing a passcode must be performed
from your own telephone.
To enter your Coral Passcode for the first time:
Dial the entire procedure in a single block sequence.
1. Dial Passcode feature code #179.
2. Dial your new passcode (four digits).
3. Redial your new passcode.
[Send]
4. Press OK or
.
5. Listen for the confirmation tone.
6. Press SPKR to hang up.
Passcode
127)
138)
147)
193 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
CAUTION !
Once a Coral passcode has
been defined, the code is
known only to you and the
system administrator. If you
forget the passcode you
cannot utilize the features that
require the code. Therefore,
write your passcode number
in a secure place for future
reference.
#179
Need help?
Do you have a question about the T328 and is the answer not in the manual?
Questions and answers
change date/ time on Tadiran Telecom desk phone