Tadiran Telecom T328 User Manual page 233

Speed Dialing Programming Coral Private Libraries
To program or change a Coral Private Library Speed Dial number:
Dial the entire procedure in a single block sequence.
1. Dial Private Speed Dial feature code #193.
2. Dial the required Private Library Number 7000-7009.
3. Dial the outside line access code.
4. Dial the outside
phone
[Send]
5. Press OK or
.
6. No confirmation tone is heard.
7. Press SPKR to hang up.

Notes: 1) Possible outside line access codes are: trunk number, trunk group number, dial service, routing access or
another public/private library number.
2) The number of digits that can be programmed for an outside phone number, including dial codes, is limited by
the system (defined system-wide). Trying to enter a longer digit string than allowed, causes a reorder tone
and programming stops.
3) A new number programmed into a utilized private library number replaces the old number.
To delete a Single Coral Private Library:
Dial the entire procedure in a single block sequence.
1. Dial Private Speed Dial feature code #193.
2. Dial the required Private Library number 7000-7009.
3. Dial cancellation code .
[Send]
4. Press OK or .
5. No confirmation tone is heard.
Speed Dialing
Programming Coral Private Libraries
number (Use special codes. See table on
page 220).
219 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)