Malicious Call Trace - Tadiran Telecom T207S User Manual

Malicious Call Trace

Details of incoming calls can be recorded using Malicious Call Trace. They are added to the record when your station rings
even if you do not answer. The number of calls stored for your station is defined by your system administrator. When this
number is exceeded, details of the next call received replace the oldest record. Details of calls are recorded until you cancel
the feature. The details recorded are: Originating number (for external calls: ANI if available, else trunk number), your
station number and the time of calls.
To activate malicious call trace:
Dial the entire procedure in a single block sequence.
1. Dial feature code #1740.
2. Dial the activation code
3. Press # or OK, depending on your phone settings, or wait for the phone to dial.
4. Listen for the confirmation tone.
5. Press SPKR to hang up.

Note: If you hear a reorder tone, Malicious Call Trace is denied at your station (as defined by the Class of Service). To
use the feature, ask your Attendant to activate Malicious Call Trace at your station.
Malicious Call Trace
.
141 T207S, T208S, T207S/NP and T208S/BL User Guide
#1740