Temporary Conference Activation - Tadiran Telecom T328 User Manual

Group Calls: Temporary Conference Activation
The Temporary Conference feature allows an authorized user to establish an Temporary (Add-On) Group Call by adding
participants as the conference is being set up. For this purpose, vacant Group Calls containing no preset members are
defined system-wide. The Group Call initiator adds members from their station. A Temporary Group Call may include
internal stations and/or external phone numbers via a public speed call library. A few preset group calls may be joined to a
Temporary Group Call via Public Libraries.
To call a temporary group:
Dial the entire procedure in a single block sequence.
1. Dial Add-On Group Call feature code #1449.
2. Dial the Group Call access code.
3. Dial required stations and/or Public Libraries (up to 5 or 14 destinations, depending on the system configuration).
4. When the list of participants is completed, dial activation code .
[Send]
5. Press OK or .
6. All the called stations start ringing.
7. Wait for members to join, hear a warning tone (if defined system-wide) every time a member answers.
8. Start speaking.

Note: For Group Call access code, see the table on
Group Calls (Conference)

Temporary Conference Activation

page 158.
159 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
#1449