Message; Leaving - Tadiran Telecom T328 User Manual

Message:Leaving
A callback indicator can be left at any system station equipped with a message lamp, at station groups, or at network
numbers. The message is comprised of the word "CALL" followed by your station name or number.
Once the message is left at the destination station, it lights the station's MWI indicating that at least one message is
waiting.

Note: When a message left to a Boss Group turns ON the message lamp of the first Boss Group member only.
To leave a message at a vacant desk or forwarded station (from idle):
Dial the entire procedure in a single block sequence.
1. Dial Message feature code #175.
2. Dial station, Boss Group or network number.
3. Press OK or [Send]
.
4. Listen for the confirmation tone.
5. Press SPKR to hang up.

Note: When you try to leave a message at a station, and receive a reorder tone, the station is probably not equipped
with a message waiting lamp, or not configured to accept messages.

Message

Leaving

182 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
#175 or #5