Class Of Service (Cos) Switchover - Tadiran Telecom FlexSet 280 User Manual

Class Of Service (COS) Switchover

Each station has a Primary and Secondary Class Of Service (COS), which
provides the basis for dialing and feature capabilities for a particular station.
You may change from one COS to another. For an additional explanation see
page A-1 in the Glossary provided at the end of this guide.
To select your station's Secondary COS:
[COS SWITCH]
1. Press or dial COS Switchover feature code #149.
2. Dial your passcode (4 digits).
3. Dial activation code
4. Listen for the confirmation tone.
To return to your station's Primary COS:
[COS SWITCH]
1. Press or dial COS Switchover feature code #149.
2. Dial your passcode (4 digits).
3. Dial cancellation code
4. Listen for the confirmation tone.

Notes: 1) In order to perform COS Switchover at your telephone, you must
first have a defined passcode (see
2) The selection of secondary COS is denied when your telephone is
in Check-out mode.

Class Of Service (COS) Switchover

.
.
page
#149
131).
45
Display Message
2 N D R C O S C H A N G E
E N T E R P A S S C O D E
Y O U R P R I M A R Y
C O S I S : xxx
Y O U R S E C O N D A R Y
C O S I S : yyy
2 N D R C O S C H A N G E
E N T E R P A S S C O D E
Y O U R S E C O N D A R Y
C O S I S : yyy
Y O U R P R I M A R Y
C O S I S : xxx
FlexSet 120/280 User Guide
Key LED