Sending Product Information To Hp - HP Jetdirect J7974E Administrator's Manual

Table 4-2 Networking Menu Items (continued)
SECURITY section
●
Security: Settings
● Authorization
●
Mgmt. Protocols
●
802.1x Authentication
●
IPsec/Firewall
DIAGNOSTICS section
●
Network Statistics
● Protocol Info
●
Configuration Page

Sending Product Information to HP

The first time that you access the Networking tab in the embedded Web server, you will be prompted
to allow the sending of product information to HP using the Internet. Product identification and usage
data collected by HP will be used to improve product features and services. Personal data is not collected
in accordance with HP privacy policies. See the Hewlett-Packard Online Privacy Statement at
http://www.hp.com.
If you choose to decline by pressing No, a log entry to record this choice may be sent to HP. To prevent
HP from making a log entry that data collection was refused, do one of the following:
●
Disable access to the Internet before pressing No.
You can disable Internet access on your browser, for example, by disabling the Web Proxy server.
After pressing No, simply re-enable Internet access.
●
Use Telnet (IPv4) to disable this functionality before pressing No.
a. Telnet to the IP address of the Jetdirect print server.
b. If prompted for a user name and password, enter "Admin" for the user name. Then enter the
password assigned to the print server.
c. Enter the following Telnet command "phone-home-config: 0"
d. To exit and save your settings, enter the command "quit". The Telnet program will ask if you
wish to save this information. Be sure to type "Y" for Yes.
●
Use an SNMP management utility or an SNMP command line utility to disable this functionality
before pressing No. The object identifier (OID) is .1.3.6.1.4.1.11.2.4.3.7.31.0 and needs to be set
to zero (0).
You can choose to enable or disable this feature at any time using the Privacy Settings page under
the Networking tab.
ENWW Networking Tab 65