Change Scsi Settings; Select Console - IBM 265 Service Manual

After choosing which adapter to use to ping the remote system, you must provide the
addresses needed to communicate with the remote system.
Ping IP Address
1. Client IP Address
2. Server IP Address
3. Gateway IP Address
4. Subnet Mask
5. Execute Ping
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _

Change SCSI Settings

This option allow you to view and change the addresses of the SCSI controllers
attached to your system.
SCSI Utilities
1. Change Hardware Spin Up Delay
2. Change SCSI Id
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _

Select Console

The Select Console Utility allows the user to select which console the user would like to
use to display the SMS menus. This selection is only for the SMS menus and does not
affect the display used by the AIX operating system.
Follow the instructions that display on the screen. To return to the SMS menu, press the
number 1 key after the word keyboard displays and before the tone sounds.
240
Service Guide
[129.132.4.20]
[129.132.4.10]
[129.132.4.30]
[255.255.255.0]
X = eXit System Management Services
X = eXit System Management Services