Hot-Swap Fan Assembly - IBM 265 Service Manual

Hot-Swap Fan Assembly

The following procedures cover removal and replacement of the hot-swap fan
assemblies.
Note: You do not need to turn off the power to the system to replace a hot-swap fan
The following illustration shows the replacement of a hot-swap fan assembly. Refer to
this illustration while performing the steps in this procedure.
1
2
3
1
3
5
7
9
11
Removal
1. For fan assemblies 2, 3, and 4, you must remove the service access cover. See
"Service Access Cover" on page 251.
290
Service Guide
assembly.
Hot-swap fan assembly 1
Fan 1 release button
Fan assembly 2 LED
Fan assembly 3 LED
Fan 3 release latch
Hot-swap fan assembly 4
4
5
6
12
10
11
2 Fan assembly 1 LED
4 Hot-swap fan assembly 2
6 Fan 2 release button
8 Hot-swap fan assembly 3
10 Fan assembly 4 LED
12 Fan 4 release latch
7
8
9