Serial Port Speed Setup Menu; Telephone Number Setup Menu - IBM 265 Service Manual

Serial Port Speed Setup Menu

This menu allows you to set serial port speed to enhance terminal performance or to
accommodate modem capabilities.
1. Serial port 1 speed:
2. Serial port 2 speed:
98. Return to Previous Menu
A speed of 9600 baud or higher is recommended. Valid serial port speeds are as
follows:
50
75
110
134
150
300

Telephone Number Setup Menu

Use this menu to set or change the telephone numbers for reporting a system failure.
1. Service Center Telephone Number:
2. Customer Administration Center Telephone Number:
3. Digital Pager Telephone Number:
4. Customer Voice Telephone Number:
5. Customer System Telephone Number:
98. Return to Previous Menu
1>
v Service Center Telephone Number is the number of the service center computer.
The service center usually includes a computer that takes calls from systems with
call-out capability. This computer is referred to as the catcher . The catcher expects
messages in a specific format to which the service processor conforms. Contact your
service provider for the correct service center telephone number to enter here. For
Serial Port Speed Setup Menu
Currently 9600
Currently 9600
600
1200
2000
2400
2400
3600
Telephone Number Setup Menu
Currently Unassigned
Currently Unassigned
Currently Unassigned
Currently Unassigned
Currently Unassigned
4800
7200
9600
19200
57600
115200
Chapter 7. Using the Service Processor
197