Adapters
The following procedures cover removal and replacement of the adapters.
Before performing these procedures, read "Handling Static-Sensitive Devices" on
page 248.
Note: This system does not support hot-plugging of PCI adapters.
Removal
1. If you have not already done so, shut down the system as described in "Stopping
the System" on page 248.
2. If you have not already done so, unplug the system power cables from the electrical
outlets.
3. If you have not already done so, remove the service access cover as described in
"Service Access Cover" on page 251.
4. Determine which adapter you are removing.
5. Disconnect any cables attached to the adapter.
266
Service Guide