IBM 265 Service Manual page 137

Table 3. Firmware Error Codes. (continued)
Error Code Description
25Cyy006 Memory DIMM failed inter-extent test.
25Cyy007 Memory DIMM failed extent access test.
25Cyy008 Memory DIMM has been deconfigured.
26020001 Invalid PCI adapter vendor ID.
Action / Possible Failing FRU
1. Replace the memory card.
Location: P1-M1
2. Replace the processor card.
Location: P1-C1
Location: P1-C2
See Memory Error Notes on page 120
for more information.
1. Replace the memory card.
Location: P1-M1
2. Replace the processor card.
Location: P1-C1
Location: P1-C2
See Memory Error Notes on page 120
for more information.
1. Use the memory config/deconfig
menu in the Service Processor
System Information Menu to check
the status of the memory DIMMs.
2. Go to "MAP 1240: Memory
Problem Resolution" on page 45.
1. Move adapter to another slot
(behind another PCI bridge).
2. Check for available firmware
updates for adapter. Apply update
if available.
3. Run AIX diagnostics on adapter.
Replace if indicated.
4. Replace adapter.
5. Check for system firmware
updates. Apply if update available.
6. Replace system board.
Location: P1
(See note 3 on page 109.)
Chapter 5. Error Code to FRU Index
121