IBM 265 Service Manual page 103

Table 1. Service Processor Checkpoints. (continued)
Checkpoint Description
E0C0 Starting X5 BIST
E0D0 Creating JTAG scanlog (This procedure
could take several minutes.)
E0E0 Pulling processor card out of the reset
state.
E0E1 Pull processor card out of reset: okay
OK Service Processor Ready. Waiting for
power-on normal operation
STBY Service processor is ready. The
operating system has been terminated;
the system is still powered on.
Action/ Possible Failing FRU
See "Error Codes E0A0, E0B0, E0C0,
E0E0, E0E1 and 40A00000 Recovery
Procedure" on page 170.
Call support
See "Error Codes E0A0, E0B0, E0C0,
E0E0, E0E1 and 40A00000 Recovery
Procedure" on page 170.
See "Error Codes E0A0, E0B0, E0C0,
E0E0, E0E1 and 40A00000 Recovery
Procedure" on page 170.
Press the system unit's power button to
power-on the system unit.
This usually indicates an operating
system crash. The service processor
menus are available. Look for error
codes related to the operating system
crash in the service processor error log.
Chapter 4. Checkpoints
87