IBM 265 Service Manual page 114

Table 2. Firmware Checkpoints. (continued)
Checkpoint
E1D0
E1D3
E1D4
98
Service Guide
Description
Create PCI SCSI node.
Create SCSI block device node.
Create SCSI byte device node (ST).
Action/ Possible Failing FRU
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 171.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 77.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 77.
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 171.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 77.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 77.
1. If a location code is associated with
the checkpoint:
v Replace the FRU identified by the
location code
v Replace, one at a time, the other
PCI adapter cards on the same
PCI bus. See "Bus SRN to FRU
Reference Table" on page 171.
v Go to MAP 1540: Minimum
Configuration, "Step 1540-24" on
page 77.
2. If no location code is associated
with the checkpoint, go to MAP
1540: Minimum Configuration, "Step
1540-24" on page 77.