Change Scsi Id; Update System Or Service Processor Firmware - IBM RS/6000 User Manual

Device
1. ethernet
2. token-ring
3. ethernet Integrated
(Press enter after making selection)
After choosing which adapter to use to ping the remote system, you must provide the
addresses needed to communicate with the remote system.
Ping IP Address
1. Client IP Address [129.132.4.20]
2. Server IP Address [129.132.4.10]
3. Gateway IP Address [129.132.4.30]
4. Subnet Mask [255.255.255.0]
.---------.
|E=Execute|
'---------'
===>

Change SCSI ID

This option allow you to view and change the addresses of the SCSI controllers
attached to your system unit.

Update System or Service Processor Firmware

These options allow you to update your system or service processor firmware from an
image on a 3.5 inch diskette. Note that you must insert a diskette containing the
firmware update image after you see a confirmation screen.
To update system and service processor firmware, use the Diagnostic Service Aid under
AIX. To obtain firmware updates, as well as update instructions, see the following Web
address: http://www.rs6000.ibm.com/support/micro.
Slot Hardware Address
3 0004AC5E08D2
5 0020357A0530
0004ACE4020B
.------.
|X=Exit|
'------'
===>
.------.
|X=Exit|
'------'
Chapter 4. System Management Services
103