Table of Contents
Advertisement
Service Processor Setup Menu
The Service Processor Setup menu is accessed from the Main Menu:
1. Change Privileged-access Password
2. Change General-Access Password
3. Enable/Disable Console Mirroring:
4. Start Talk Mode
5. OS Surveillance Setup Menu
6. Reset Service Processor
7. Reprogram Service Processor Flash EPROM
8. Serial Port Snoop Setup Menu
98. Return to Previous Menu
99. Exit from Menus
1>
Note: Unless otherwise stated in the menu responses, settings become effective when
Passwords
Passwords can be any combination of up to eight alphanumeric characters. You can
enter longer passwords, but the entries are truncated to include only the first eight
characters. Passwords can be set from the Service Processor menu or from the System
Management Services menus.
For security purposes, the service processor counts the number of attempts to enter
correct passwords. The results of not recognizing a correct password within this error
threshold are different, depending on whether the attempts are being made locally (at
the system) or remotely (through a modem). The error threshold is three attempts.
If the error threshold is reached by someone entering passwords at the system, the
service processor exits the menus. This action is taken based on the assumption that
the system is in an adequately secure location with only authorized users having
access. Such users must still successfully enter a login password to access AIX.
If the error threshold is reached by someone entering passwords remotely, the service
processor disconnects the modem to prevent potential security attacks on the server by
unauthorized remote users.
SERVICE PROCESSOR SETUP MENU
Currently Disabled
a menu is exited using option 98 or 99.
Chapter 7. Using the Service Processor
183
Advertisement
Table of Contents
