IBM 265 Service Manual page 245

Selecting the Ping icon displays a screen in which you select the communications
(token-ring or Ethernet) to be used to send test transmissions.
<Ping>
Token Ring, slot #=4
ethernet, (Integrated)
Ping Exit
To use this screen, do the following:
1. Use the arrow keys or mouse to highlight an adapter to configure.
Note: Clicking with the mouse sends the ping. If you use the arrow keys, you must
press the space bar, then use the Ping icon.
2. Press the spacebar to select the adapter.
3. Highlight the Ping icon and press Enter to send the test transmission.
229
Chapter 8. Using System Management Services