Text-Based System Management Services - IBM 265 Service Manual

Text-Based System Management Services

The text-based System Management Services are available if an ASCII terminal is
attached to your system. The text-based System Management Services make it
possible for you to view information about your system and to perform such tasks as
setting passwords and changing device configurations.
To start the text-based System Management Services, press the number 1 key on the
ASCII terminal after the word "keyboard" appears and before the word "speaker"
appears. After the text-based System Management Services starts, the following screen
displays.
Note: The version of firmware currently installed in your system is displayed at the top
On all menus except the Main Menu, there are several navigator keys:
M
ESC
X
When there is more than one page of information to display, there are two additional
navigator keys:
N
P
Note: The lower-case navigator key has the same effect as the upper-case key that is
On each menu screen, you are given the option of choosing a menu item and pressing
enter (if applicable), or selecting a navigator key.
of each screen in the text-based System Management Services. Note the
version number. Processor and other device upgrades may require a specific
version of firmware to be installed in your system. Update System Firmware is
an option under the Main Menu.
Return to the main menu.
Return to the previous menu.
Exit the System Management Services and start the operating system.
If X is entered, you are asked to confirm your choice to exit the SMS menus
and start the operating system.
Display the next page of the list.
Display the next page of the list.
shown on the screen. For example, "m" or "M" takes you back to the main
menu.
Chapter 8. Using System Management Services
233