Table of Contents
Advertisement
BIOS Configuration/Setup Utility
The Configuration/Setup Utility lets you review and
change important information about the computer and
its hardware.
Working with the Configuration/Setup
Utility Menu
Starting the Configuration/Setup Utility
Follow these steps to enter Setup when the computer
is off:
1. Turn on your monitor.
2. Press and hold F1.
3. Turn on the system unit.
If you have previously set a password, you are
prompted to type in the password after you press the
F1 key. Refer to the Configuration/Setup Utility Main
Menu below.
Main
Devices
System Summary
Product Data:
Machine Type / Model
Flash EEPROM Revision Level
Boot Block Revision Level
System Board Identifier
System Serial Number
BIOS Date (MM/DD/YY)
System UUID
System Time (HH:MM:SS):
System Date (MM/DD/YYYY):
Language:
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ : Up/Down
F1: Help
← ← ← ← → → → → : Left/Right Enter: Select
Esc: Exit
Startup
Advanced
XXXX / XXXX
22KT05AUS
2205A
XXXXXXXXX
XXXXXXXXX
XX/XX/XX
[XX:XX:XX]
[XX/XX/XXXX]
[English (US) ]
- / + : Select Values F9: Setup Defaults
Security
F10: Save & Exit
General Information 11
Power
Exit
Advertisement
Table of Contents
