Making Changes With The Configuration/Setup Utility; The Configuration/Setup Utility Main Menu - IBM Aptiva Hardware Handbook

2.
If you are using Rapid Resume (Rapid Resume is
enabled), press Ctrl + Alt + Delete.
If you are not using Rapid Resume, skip Step 2.
3.
This symbol will appear on the screen.
Press F1 while the symbol is displayed to get the
Configuration/Setup Utility.
Making changes with the
Configuration/Setup Utility
Read this section to learn how to choose a feature from
the main menu. We also describe the keys you use to
move through and make changes to the Configuration/
Setup Utility screens and provide a step-by-step
example of how to use the Configuration/Setup Utility.
The Configuration/Setup Utility main
menu
The main menu appears when you start the
Configuration/Setup Utility. The main menu lists all of
the features of the Configuration/Setup Utility. (The
main menu you see on your computer may look slightly
different than the menu shown here, but will operate the
same way.).
62 Using the Configuration/Setup Utility
↑ ↓