User Manual
10.7.4 Emergency Test
From the MIL704 DC MENU scroll to the EMERGENCY DC entry using the up and down cursor keys
(Figure 10-6). Press the ENTER key to start the EMERGENCY TEST.
VOLTA
GE
This
te t will change the output voltage for the selected phase in the following sequence:
s
1. 28V system:
18V for 1 minute.
29V for 1 minute.
28V for 1 minute.
2. 270V system:
250V for 1 minute.
280V for 1 minute.
270V for 1 minute.
The
key (backspace) will terminate the test at any time.
California Instruments
Figure 10-6: Emergency Test
2253i / 2253iX
144