Table of Contents
Advertisement
User Manual
3.3.2 Rackmount
If the power source is to be mounted in a cabinet system, proper supports such as rack slides,
brackets or a shelf must be provided to support the weight of the unit along its depth. The rack ears on
the front of the power source are not intended to support the entire weight of the unit and should only
be used to prevent the unit from sliding forward.
Contact the cabinet m
24"-28" deep cabinets are available from California Instruments. (-RMS option). The rack mount slide
mounting holes centerlines on the side of the power source are 2.30 inches / 58.4 mm above the
bottom edge of the front panel.
California Instruments
anufacturer for suitable rack support accessories. E
Figure 3-1: Rack Mount Slides (-RMS option) position
2253i / 2253iX
xtendable rack slides for
34
Advertisement
Table of Contents
