Table of Contents
Advertisement
User Manual
4.1.4 The Shuttle Knob
The i/iX Series has a single rota
numeric keypad. This knob may
settings in a given menu field. The parameter or field affected by turning the shuttle knob is indic
by a left pointing arrow (cursor) on the LCD display. Note that it is not possible to move this cursor
position between menu fields us
instead. Data and parameter en
The shuttle knob can operate in one of two distinct modes of operation:
MODE
IMMEDIATE mode
SET mo
de
California Instruments
Counter
Clock
wise
DECR
Figure 4-2: Shuttle Knob
ting knob ("shuttle"). This shuttle knob is located to the right of the
be used to continuously vary parameter values or selec
ing the knob. Use the UP and DOWN arrow (cursor) keys for this
try can also be done through the numeric keypad.
DESCRIPTION
Any time the ENTER key is pressed, the power source returns to it
normal mode of operation. In this mode, changes made with the
shuttle knob will take immediate effect. The IMMEDIATE mode is
useful for continuously varying output values such as voltage and
frequency and observing the effect on the load.
When the Set key is pressed again while the PROGRAM screen is
already displayed, changes made with the shuttle to any output
parameter will not take effect until the ENTE
mode, any changes made to a setup menu will have a blinking curso
to indicate the pending change condition. This mode allows change
to be made to all output parameters
by pressing the ENTER key.
Clock
wise
INCR
R key is pressed. In this
and executing them all at once
2253i / 2253iX
t from multiple
ated
s
r
s
51
Advertisement
Table of Contents
