Table of Contents
Advertisement
User Manual
8. Miscellaneous Options
8.1 IEEE488 Interface (-GPIB)
The GPIB interface is available on all iX Series models. It is also available as a factory installed option
on the "i" Series. The operation of the GPIB interface is the same on both "i" and "iX"series mod
For details on operation of the GPIB interface and programming command syntax, refer to the i/iX
Compact Series Program
8.2 Atlas Based Language Extensions (-ABL)
All Compact i/iX series model support the IEEE SCPI (Standard Commands for Programmable
Instruments) command language syntax for programming over the bus. (USB, GPIB or LAN). The –
ABL option provides backward compatibility with programs written for certain older products from oth
manufacturers.
For details on use the Atlas style syntax, refer to the i/iX Compact Series Programming manual, CI
P/N 6005-961 provided in PDF format on CD ROM CIC496.
8.3 Ex
ternal Sync (-EXS)
If installed, this option reassigns the External Trigger input on DB15 (J18) to act as an external sync
input. A TTL logic level square wave signal is required to act as a sync reference. The output
frequency will track the sync signal when the power source is set to external sync m
C
ONTROL menu for setting information. Section 4.2.5.
California Instruments
ming manual, CI P/N 6005-961 provided in PDF format on CD ROM CIC496.
2253i / 2253iX
els.
er
ode. Refer to the
107
Advertisement
Table of Contents
