Table 3-1: Output Terminal Connections - California Instruments 2253i User Manual

User Manual
3.6.2 Output Terminal Block - OUTPUT
Each chassis has a single AC output terminal strip. The output terminal strip must be covered usi
the supplied AC Output safety cover. The terminal strip is large enough to accommodate required wire
gauge sizes. The terminal strip is located in the lo
from the back). Connector type is Magnum, A307104R50.
The AC output terminal strip accommodates a #6 ring or spade lug. The use of sleeved ring lugs
(12/10-6 Yellow sleeve lug) or compressed cable lug for the load carrying output wiring is
recommended.
Foll owing outpu
Use
OU TPUT (TB1)
SEN SE (TB2)
Connector
TB1
California Instruments
t terminal lug s and onnectors are included in c
CI P/N Description
FS20 04 Ring Lug 12/10-6
410636 Mating Connector
T min er al
1
2
3
4

Table 3-1: Output Terminal connections.

wer left corner on the rear panel of the unit. (Looking
i/iX ship kit:
Qty supplied
4
1
Output
Output øA
Output øB
Output øC
Output Neut ral Common) (
2253i / 2253iX
ng
For use with:
A, B, C, N
Sense A, B, C, N
38