Table of Contents
Advertisement
User Manual
8.8 Rack Mount Slides (-RMS)
For moun
ting the 2253i/iX in a 19-inch instrument cabinet, it is recommended to use the –RMS rack
mount slid
es kit to provide adequate support for the power source weight. This allows the unit to be
pulled forward for servicing as well. When using a cabinet not supplied by California Instruments,
contact the cabinet vendor for shelf or bracket accessories designed to support the weight of an
instrument.
The rack mount slide mounting holes centerlines on the side of the power source are 2.30 inches /
58.4 mm above the bottom edge of the front panel.
Note: The 2253i/iX series models cannot be mounted in a cabinet by just using
rack ears. They require additional support.
California Instruments
Figure 8-1: Rack Mount Slides (-RMS option) position
2253i / 2253iX
the front panel
110
Advertisement
Table of Contents
