User Manual
ENTRY
California Instruments
DESCRIPTION
GWAddress
Gateway address setting. A default gateway
is a node (a router) on a computer network
that serves as an access point to another
network.
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Use the numeric data pad to enter
each field. To
use the decimal point key on the keypad.
Any change to this value will NOT take effect
until after power on the unit has been cycled.
HostBits
Number of host bits as opposed to network
bits in network mask. A CIDR class C network
uses 24 network bits and 8 host bits. (Class A
= 24, Class B = 16).
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Any change to this value will NOT
take effect until after power on the unit has
been cycled.
Port No
TCP remote port number. This value must be
set to 5025 (SCPI) to support the built
page.
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Any ch
take effect until after power on the unit has
been cycled.
move between the four fields,
ange to this value will NOT
2253i / 2253iX
in web
72