Table of Contents
Advertisement
User Manual
16. Err
or Me sages
s
Any errors that occur during operation
resu
lt in e
rro
r messages. Error me
the error message queue from which they can be queried using
queue has a finite depth. If more error messages are generated
queue overflow message (Error –400, "Queue Overflow) will be put in the last queue location. To
empty the queue, use the system error query until a 0, "No Error
Erro
rs ap
pe
aring on the LCD
multiple error messages are generated in succession, only the last message will be visible as there is
only space for one error message on the LCD display.
The same area of the display is also u
The table below displays a list of poss
and remedy.
Number
Message String
0
"No error"
-100
"Command error"
-102
"Syntax error"
-103
"Invalid separator"
-104
"Data type error"
-108
"Parameter not allowed"
-109
"Missing parameter"
-110
"Command header error"
-111
"Header separator error"
-112
"Program mnemonic too
long"
-113
"Undefined header"
-120
"Numeric data erro
-121
"Invalid character in
number"
-123
"Exponent too large"
-128
"Numeric data not
allowed"
-168
"Block data not allowed"
-200
"Execution error"
California Instruments
from either the fron
ssa
ges are displayed on t
will gen
erally remain visible until
sed to display status m
ible error and
status mess
Cause
No errors in queue
Unable to complete
requested operation
Command syntax
incorrect.
SCPI separator not
recognized
Data type invalid.
One or mo
re additional
parameters were receiv
Too few pa
rameters
received for requested
operation
Command heade
incorrect
Invalid command
separator used.
Syntax error
Command not recognized
error
r"
Data received is no
number
Number received contains
non-numeric character(s
Exponent in number
exceeds limits
Number received when
number is not allowed.
Block data was sent.
Command could not be
executed
t pane
l or the remote control in
he L
CD display. They are also stored in
the SYST:ERR? Query. The error
than can be held in the queue, a
" result is received.
the user moves to another screen. If
es
sages.
ages along with their possible cause
Remedy
Unit may be in a mode inconsistent w
request.
Misspelled or unsupported command
See SC
PI section of programming
manual.
Check command for support
types
Check programming manual for c
ed.
number of parameters
Check programming manual for correct
number of parameters
r
Check syntax of command.
Use semi-colon to separate command
header
s
Check programming manual for corre
command syntax
Check programming manual for correct
command syntax
t a
Check programming manual for correct
command syntax
Check programming manua
)
command syntax
Check programming manual for correc
parameter range
Check programming manual for correct
command syntax
Check programming
command syntax
Command may be inconsistent with
mode of operation.
2253i / 2253iX
terface will
ith
ed data
orrect
ct
l for correct
t
manual for correct
150
Advertisement
Table of Contents
