Table of Contents
Advertisement
User Manual
4.3 Output Programming
4.3.1 Set the Output
Output parameters are all set from the PROGRAM screen.
1. Use the MENU key and select the PROGRAM entry.
2. Press the ENTER key to bring up the PROGRAM menu.
or
2. Use the SET key to directly bring up the PROGRAM menu.
There are two methods for programming output parameters:
IMMEDIATE mode
SET mode
4.3.2 Slewing Output Values in IMMEDIATE Mode
The
default mode of operation is an immediate mode in which changes to outpu
with the knob or the entry keypad are immediately reflected at the output.
To change the output voltage:
1. Place the cursor on the VOLT entry
2. Rotate the shuttle knob clockwise to increase the value, counterclockwise to decrease the value
or use the Keypad to enter a value and press the Enter key.
These changes take effect imme
To change the output frequency:
1. Place the cursor on the FREQ entry
2. Rotate the shuttle knob clockwise to increase the value, counterclockwise to decrease the value
or use the keypad to enter a value and press the Enter key.
These changes take effect immediately.
California Instruments
diately.
2253i / 2253iX
t parameters made
Counter
Clock
Clock
wise
wise
DECR
INCR
Counter
Clock
Clock
wise
wise
DECR
INCR
78
Advertisement
Table of Contents
