1.2.3 Removal and Reinstallation of the Parameter Unit
To ensure safety, remove and reinstall the parameter unit after switching the power off.
Removal
1) Hold down the top button of the parameter unit and pull the
parameter unit toward you, using the catch as a support.
I
Reinstallation
Direct installat,ion onto the inverter
1,) After fitting the fixing hole of the parameter unit (PU) on
the catch of the cover, push the parameter unit into the
inverter, using the catch as a support.
1) Securely insert one connector of the cable into the connec-
tor of the inverter and the other cable connector into the
PU connector.
Insert the cable connector along the guides of the inverter
or PU connector. (If the orientation is incorrect, the inverter
may be damaged.)
2) After plugging the cable connector into the inverter con-
nector, fix it securely with the installation screws.
Note: 1. The parameter unit must be installed to the inverter with the front cover fitted.
2.
During installation, do not apply force to the display (liquid crystal).