Handling Of The Fr-Zrwe Parameter Copy Unit - Mitsubishi Electric Freqrol-A100 Instruction Manual

The functions of the inverter
are limited by the FR-PUOI
E.
See the function comparison
on the right.
Function
Operation
setting
function
Operation
node setting
Monitoring
function
Parameter
settting
function
Calibration
function
Alarm
fisplay clear
Parameter
initialization
Alarm
display
FR-PU02E-I
Parameter Unit
0000
O B O O
Frequency setting 0 to 120Hz
Forward rotation, reverse rota-
tion, stop
PU operation, external opera-
tion, jog operation, PU/external
combined operation
Output frequency, output cur-
rent, output voltage, alarm dis-
play, frequency set value, runn-
ing speed, converter output
voltage, electronic overcurrent
protector load factor, output
current peak value, converter
output voltage peak value, in-
put power, output power, input
terminal state, output terminal
state, load meter, cumulative
operation time, cumulative
power.
Enabled for all of Pr.0 to Pr.
159 and Pr. 200 to Pr. 231.
Pr. 900 to Pr. 905
Batch clear is performed using
"ALARM HISTORY CLEARVn
the help mode.
Parameter clear (calibration
function not cleared) or all para-
meter clear (calibration func-
tion cleared) can be set.
OV1 to 0 V 3
PUE, RET, CPU
FR-PUO1 E
Parameter Unit
As on the left
As on the left
Output frequency, output cur-
rent, output voltage, alarm dis-
play
The other items cannot be
monitored.
~ i m i t e d to Pr. 0 to Pr. 79.
Disabled for the gear backlash
compensation and 5-point flex-
~ b l e
V/F
characteristic parame-
C1 to C5
Note that C1 cannot be used
when any of 101 to 121 (AM ter.
minal) is in Pr. 54. Pr. 901 (AM
terminal calibration) cannot be
Batch clear is performed by
pressing the CLEAR key when
a monitoring error is displayed.
4 1 1 parameter clear (calibration
function not cleared) can only
be set.
The alarms indicated
on the left are dis-
played in this way.
1
In addition, the following functions are not available for the FR-
PUO1 E:
Parameter initial value list
Parameter change list
Troubleshooting
Inverter reset from the parameter unit
Graphic display of parameter functions
1.4.5 Handling of the FR-ZRWE Parameter Copy Unit
The FR-ZRWE parameter copy unit can be.used by connection to the inverter by a cable (option).
'Like the
FR-PUO1 E, the FR-ZRWE limits the inverter functions. In addition, the function of reading
and copying a batch of parameters to another inverter cannot be used.