Mitsubishi Electric Freqrol-A100 Instruction Manual page 68

Selection and execution of "2 Pr. List"
Operation procedure
1) Call the parameter menu in accordance with page 52.
2) Using the [ ' I ] key, move the cursor ( 4 ) to "2 Pr. List".
3) Press the [READ] key.
....
The parameter list is displayed.
4) Press the [ A ] or [ ' I ] key to move the cursor ( 4 ) to the re-
quired item.
5) If the required item is not found, press the [SHIFT] key and
[ V ] key together to shift to the next page.
I
Press the [SHIFT] key to move
to the next parameter.
Press any of the [MONITOR], [EXT OP]
and [PU OP] keys to switch to the corre-
sponding mode.
6) Press the [READ] key.
....
The parameter specified by the
cursor is read and the inverter is
put in the parameter setting
mode.
Display of
"3
Set Pr. List"
Operation procedure 1 (To call from the help function menu)
@
1) Call the parameter menu in accordance with page 52.
I
r l
I
1
3) Press the [READ] key.
....
The parameter change list is dis-
played. (Note)
2) Using the [ V ] key, move the cursor
(o)
to "3 Set Pr. List".
Press any of the [MONITOR], [SET],
[EXT OP] and [PU OP] keys to switch to
the corresponding mode.
3,
sei
R. LM
Display
I
Display
Note: Press the [SHIFT] key and [V]
key together to move to the next page.