1.2 STRUCTURE
1.2.1 Structure
For the location of the charge lamp, see the terminal block layout diagram on page 175.
H
FR-A120E-0.75K(P) to 11 K, FR-A140E-0.75K(P) to 11 K
(Not equipped with the brake resistor.)
Chassis
lnverter LED
Parameter unit
[
Replaced by an accessory cover on
the model which is not equipped
with the parameter unit.
Capacity plate
Rating plate
\
IW
Cooling
fan
Front cover
Cooling air
<FR-A120E-3.7K rear view>
H
FR-A120E-15K to 30K, FR-A140E-15K to 22K
I (Not equipped with the brake resistor.)
,
lnverter LED
Cooling
fan
Chassis
(plastic)
Cooling air
*
I
<FR-A120E-15K rear views
FR-A120E-37K to 55K, FR-A140E-30K to 55K
I
(The chassis and cover are made of steel. These models are not equipped with the brake resistor.)
lnverter LED
Accessory cover
When using the parameter unit, re-
move this accessory cover and install
the parameter unit in this position.
Front cover
Capacity plate
Rating plate
Frontcover installation screws